FABRICATION OF THE A METALLIC BOOKSHELF

ABSTRACT

Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet. Precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel.

The shelf is made up of 3 partition. In fabricating the metallic shelf several process where involved. We plundered on the material to be used that can hold the number of the books i.e. the strength of the material.

Thereafter accurate measurements of the mild sheets were made we also considered the rigidity of the metallic shelf. This led us to using square pipes for the support of the shelf. The square pipes were also measured to give the dimensions use.

The already cut square pipes were used form the frame by welding it together. Then the already measured and cut mild sheets were also welded to the frame. The doors are made up of the square pipes and wire gauze welded together. The shelf was also painted to give good outlook after smoothening and filling. Rollers were also fixed beneath to enhance good and easy movement of the shelf due to its weight.

TABLE OF CONTENT

Title Page ii

Letter of Transmittal iii

Release Page iv

Signature Page v

Approval Page vi

Dedication vii

Acknowledgement viii

Table of content ix

Abstract xi

CHAPTER ONE

1.1 Introduction 1

1.2 Description of the bookshelf 2

CHAPTER TWO

2.1 Mode of Operation 6

2.2 Material selection 8

CHAPTER THREE

3.1 Fabrication 10

3.2 Fabrication Analysis 10

3.3 Capacity of The Bookshelf 12

3.4 Fabrication Experiment 12

3.5 Construction 14

CHAPTER FOUR

4.1 Cost of Analysis 17

CHAPTER FIVE

5.1 Conclusion 20

5.2 Recommendation 21

Reference 22

Report Access / View File

Overall Rating

0

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

APA

T0gOSTL5c0005cdc49c47.77861884, Q. (2018). FABRICATION OF THE A METALLIC BOOKSHELF. Afribary. Retrieved from https://beta.afribary.com/works/fabrication-of-the-a-metallic-bookshelf-2594

MLA 8th

T0gOSTL5c0005cdc49c47.77861884, QQXlA1z5c0005cdbe9d75.44641593 "FABRICATION OF THE A METALLIC BOOKSHELF" Afribary. Afribary, 29 Jan. 2018, https://beta.afribary.com/works/fabrication-of-the-a-metallic-bookshelf-2594. Accessed 08 Feb. 2026.

MLA7

T0gOSTL5c0005cdc49c47.77861884, QQXlA1z5c0005cdbe9d75.44641593 . "FABRICATION OF THE A METALLIC BOOKSHELF". Afribary, Afribary, 29 Jan. 2018. Web. 08 Feb. 2026. < https://beta.afribary.com/works/fabrication-of-the-a-metallic-bookshelf-2594 >.

Chicago

T0gOSTL5c0005cdc49c47.77861884, QQXlA1z5c0005cdbe9d75.44641593 . "FABRICATION OF THE A METALLIC BOOKSHELF" Afribary (2018). Accessed February 08, 2026. https://beta.afribary.com/works/fabrication-of-the-a-metallic-bookshelf-2594

FABRICATION OF THE A METALLIC BOOKSHELF

0

Document Details

Related Works