DESIGN AND IMPLEMENTATION OF A BILL OF MATERIALS PROCESSING SYSTEM (A CASE STUDY OF EMENITE NIG. LTD. EMENE, ENUGU)

Overview
Cite Work

ABSTRACT

With the trend of technology growth in the world of today, virtually every facet of human work has been affected; even the remotest of it all, and the production circle cannot be left out. This study was carried out to verify all the manual processes involved in bill-of-material processing system and to seek a way of automating the system for effective operations.

Since there is continuous moves towards technological advances that enhanced productivity of labour and free human beings of tasks done more economically by machines. Computer and its applications have become indispensable and vital tools in economic, industrial and social development of the advanced countries of the world. Nigeria as a developing country cannot afford to lag too far behind in this kind of revolution. Therefore there is every need to know in every discipline the areas, which attracts computerization and why they need it.

In this project, the software engineering principles were applied in the analysis, coding and testing of the software developed for the Bill-of-material processing. Serious attention was also give to the design of the user interface.

In the development of the software, visual basic programming language was used de to its support for all the features desired. A brief user’s guide is also provided. The end result is a software that is very effective and efficient in meeting it objectives and at the same time user friendly.

TABLE OF CONTENTS

Title page i

Certification ii

Dedication iii

Acknowledgement iv

Abstract v

Table of contents vii

CHAPTER ONE

INTRODUCTION 1

1.1 Background of the study 1

1.2 State of the problem 2

1.3 Purpose of the study 3

1.4 Aims and objectives 3

1.5 Scope of study 5

1.6 Limitations of study 5

1.7 Assumptions 6

1.8 Definition of terms 7

CHAPTER TWO

LITERATURE REVIEW 8

CHAPTER THREE

3.1 Description and analysis of existing system 15

3.2 Fact finding method used 17

3.3 Organization structure 19

3.4 Objectives of Existing system 21

3.5 Input, Process and Output Analysis 22

3.6 Information Flow Diagrams 26

3.7 Problems of the Existing System 27

3.8 Justification of the New System 28

CHAPTER FOUR

4.1 Design of the New System 30

4.2 Input Specification and design 30

4.3 Output specification and design 32

4.4 File Design 34

4.5 Procedure chart 36

4.6 System flow chart 38

4.7 System requirements 40

CHAPTER FIVE

5.1 Implementation 42

5.2 Program Design 45

5.3 Program Flowchart 48

5.4 Pseudo code 54

5.5 Source Program: Test Run 59

CHAPTER SIX

Documentation 60

CHAPTER SEVEN

7.1 Recommendation 62

7.2 Conclusion 64

Bibliography 65

Read Download

DESIGN AND IMPLEMENTATION OF A BILL OF MATERIALS PROCESSING SYSTEM (A CASE STUDY OF EMENITE NIG. LTD. EMENE, ENUGU)

Related Works